Product information "Lunatone Light Management Combi Sensor Module DALI CS - 86458621"
The lighting management Combi Sensor module DALI CS from Lunatone is a sensor module for automatic lighting control in a DALI system. It is suitable for built-in mounting and can be used either as an active light control unit or for measurements and monitoring only. Direct mounting is possible on a flush-mounted box and cavity walls.
The motion-dependent light control is controlled via passive infrared sensor. By means of the DALI Cockpit software the sensor can be easily configured via the DALI bus. An automatic lighting control and a sensor for ambient temperature are integrated.
The control of the DALI circuit works via DALI commands (such as ON / OFF, RECALL MIN / MAX, GO TO SCENE X, etc.) to single destination addresses, groups or broadcast. A simple group assignment is possible via the rotary switch on the back.
The sensor module is supplied directly via the DALI cable, therefore, no additional connection is necessary.
The housing of the Lunatone light management CombiSensor module DALI CS is IP20 protected.
Downloads & Documents
Login
Electrical data
operating frequency: | 0/50-60 Hz |
---|---|
rated voltage: | DALI bus V |
conformity: | CE |
Casing
ballproof: | no |
---|---|
fire protection: | no |
form type: | round |
protection type: | IP20 |
material: | plastic |
mounting: | flush mounting |
environment temperature from: | -20 °C |
environment temperature to: | 70 °C |
Photometric data
sensor: | yes |
---|---|
response brightness to: | 2500 Lux |
response brightness from: | 0 Lux |
detection range: | 12 m |
interface: | DALI |
sensor type: | passive infrared |
solar panel: | no |
Dimensions & packaging
EAN | 9010342010781 |
---|---|
Height | 47 mm |
Weight | 67 g |