Compact desktop luminaire with flat, round luminaire head, three adjustment joints and a base. Luminaire with Active equipment for controlling light colour viaseparate control unit. Luminaire with Active configuration for optional automatic control of light colour. The luminaire can be controlled via an app or manually withthe operating elements on the luminaire head. Suitable for lighting an area RF3 according to DIN 5035-8 with up to 500lx without additional lighting. In combinationwith general lighting (500lx), modified illuminance levels according to DIN EN 12464-1:2021 of up to 1000lx are achieved for office-specific visual tasks in RF3 area.Ceiling luminaires with optional Lightgrid configuration can be networked with the desktop luminaire to synchronise the light colour. With baseplate for setting up ona flat surface. The baseplate is fully lined with felt to protect the standing surface. The vertical joint on the luminaire base enables the luminaire head to be rotatedby 120°. With prismatic cover for optimal light distribution. With direct asymmetric wide light distribution.. Glare evaluation according to UGR rating (EN 12464-1) <16. The following information on luminaire luminous flux and power consumption of the system refer to operation of this luminaire with dynamic, settable light colour(HCL) in warm white light colour (2700 K) operating mode. Luminaire luminous flux 650 lm, connected load 8,50 W, luminous efficiency of luminaire 76 lm/W. Lightcolour variable (warm white - daylight white), correlated colour temperature (CCT) variable (2700 K - 6000 K), general colour rendering index (CRI) R a > 90. Colourlocus tolerance (initial MacAdam) ≤ 3 SDCM, Mean rated service life L80(t q 25 °C) = 50,000 h. Luminaire body of die-cast aluminium. Surface fine-texturedpowder-coated, colour black. (RAL 9005). Baseplate dimensions: Ø 190 mm x 10 mm. Dimensions of luminaire head Ø 134 mm x 23 mm, Luminaire height(continuously adjustable) 390 mm - 715 mm. Weight: 2,8 kg. Safety class (EN 61140): II, protection rating (DIN EN 60529): IP20, impact resistance level inaccordance with IEC 62262: IK02, testing temperature of wire glow test in accordance with IEC 60695-2-11: 650 °C. The power adapter (Euro plug type C, EN50075) is equipped with a connection cable and coupling for connection to the luminaire cable. The cable routing is completely within the luminaire body, theCultega Act T SMC PAW 600 ETDI 05TOC: 785485908.06.2022 Page 3 / 3 All technical data including details of weight and dimensions have been compiled with all due care. Errors excepted. Productillustrations serve as examples and may differ from the original. We reserve the right to make alterations in the interest of improvingour products.connection cable is safely implemented via a plastic clamping device. The connection cable (1500 mm) at the rear is connected to the connection cable of thepower supply unit (1500 mm) by means of a plug connection. The total cable length of the connection is 3000 mm. With electronic control gear unit, dimmable(integrated). The control gear unit is replaceable in accordance with the ecodesign requirements (VO (EU) 2019/2020). With integrated control gear unit for daytimedependent and seasonally dependent control of the light colour (circadian control). Operation via 2 buttons (On/Off/brightness/light colour/HCL curve). With statusLED to indicate the operating mode. The luminaire complies with the fundamental requirements of applicable EU regulations and product safety legislation andbears the CE symbol. With Smart Connect equipment for combination with a LiveLink Lightgrid Controller