Product information "Niko UP motion detector Swissgarde 300 UP D - 25290D"
The Niko UP motion detector Swissgarde 300 UP D motion detector is ideal for rooms where a frontal approach to the sensor is not possible. You can use the Swissgarde 300 UP D motion detector via doors and elevator inputs or in switch programs. You can also use the 300 UP D motion detector as a flush-mounted wall detector for stairways, corridors, cellars and garages. Thanks to the horizontal and vertical detection area (also via doors and access points) and 3 PIR sensors, you have a very accurate detection angle range of 180 °. A daylight-dependent lighting control can be switched on and off (see installation instructions). The Swissgarde 300 UP D motion detector can be installed between 2.00 and 4.00 m in height. For the interior, the Swissgarde 300 UP D movement detector is equipped with the IP20 protection . Niko also offers 5 years manufacturing guarantee for all products.
You can program the SwissGuard 300 UP D motion detector by RC radio remote control (RC = Radio Controlled) or IR hand transmitters. These articles can be found in the lower cross-selling area and can also be ordered at the same time.
