24V constant voltage LED ECG with 150W
The 24V constant voltage LED driver DC 150W 24V SLIM constant voltage LED driver is suitable for installation in Class I luminaires. The driver itself also has protection class I and is thus protected against electric shocks in direct or indirect contact. The rated power is up to 150 watts.
The input and output terminal blocks are on the same side. In addition, the LED ECG has a single terminal and primary and secondary circuit (wire cross section up to 1.5mm2 / AWG15). It is secured with a slot for screws.
Overheating/short circuit/overload protection
The LED driver DC 150W 24V SLIM is protected against overheating and short circuits, mains voltage peaks and against overload. In addition, it has a protection fuse at the input.