32W constant current / constant voltage LED ECG
TCI's IP20-protected, dimmbale constant current/constant voltage DC JOLLY MD is suitable for luminaire installation or independent mounting indoors. Its protection class II prevents electric shocks in direct or indirect contact.
The LED driver has a nominal output of up to 32 watts. The input and output terminals are located on the opposite side (wire cross-section up to 2.5 mm2 / AWG13). Additionally, there are double terminal blocks to loop other drivers. There are clamping screws on primary and secondary circuits for cables with diameter of min. 3 mm - max. 8 mm.
Leading edge / trailing edge dimming
The TCI LED ECG has DIP switches for adjusting the output current and an Active Power Factor Corrector. The current regulation including temperature fluctuations is + - 5%. The LED driver is dimmed via leading edge and trailing edge dimming
The constant current/constant voltage LED driver DC JOLLY MD is protected against overheating and short circuits, mains voltage spikes and overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a.
