DALI/0-10V dimmable 25W LED ECG
TCI's IP20-protected, dimmable constant current LED driver DC MAXI JOLLY DALI H/2 is suitable for installation in luminaires of protection class I or independent installation indoors. Its protection class I prevents electric shocks in direct or indirect contact. The LED driver has a nominal output of up to 25 watts.
The input and output terminals are located on the same side (wire cross-section up to 1.5 - 2.5 mm2 / AWG15 - AWG13). Clamping screws for cables with a minimum diameter of 3 mm to a maximum of 8 mm are mounted on the primary and secondary circuits.
Output current ajdustable via DIP switches
The TCI LED ECG has an Active Power Factor Corrector. In addition, an analog input for a thermal sensor and a 12 V auxiliary output for a maximum of 100 mA are integrated. The output current can be adjusted by means of DIP switches. The current regulation including temperature fluctuations is + - 5%. The LED driver is dimmed via DALI or 0-10V.
The constant current LED driver DC MAXI JOLLY DALI H/2 is protected against overheating and short circuits, mains voltage spikes and overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a.