Product information "TCI LED-Driver DC MAXI JOLLY HV DALI 127409"
The DC MAXI JOLLY HV DALI from TCI is a constant current LED driver which can be used both for luminaire installation and for independent mounting. Its maximal system power is 60 W. DIP switches on the driver allow an adjustion of the output current.
The LED-ECG is equipped with IP20 protection and suitable for indoor use. Its class 2 protection prevents electric shocks for direct or indirect contact.
The LED driver has a 12 V auxiliary output for a maximum of 100 mA and an analogical input for a thermal sensor. Additionally, an active power factor corrector is integrated.
The LED ECG is dimmable via 1...10V, PushDIM oder DALI interface.
The input and output terminal blocks are on the same side (wire cross-section up to 2.5 mm2 / AWG13). Clamping screws for cables with a diameter of min. 3 mm – max. 8 mm are mounted on primary and secondary circuits.
The TCI DC MAXI JOLLY HV DALI is protected against overheating and short circuits, mains voltage spikes and overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a The control accuracy of the output current including temperature fluctuations is + - 5%. It has a service life of 50,000 hours.
Downloads & Documents
Login
Electrical data
number of channels: | 1 |
---|---|
rated voltage: | 110-127 V |
conformity: | CE, ENEC |
lifetime: | 50000 h |
system power: | 28 |
Casing
ballproof: | no |
---|---|
fire protection: | no |
form type: | rectangular |
max housing temperature (tc-max): | 90 °C |
protection type: | IP20 |
mounting: | with strain relief |
environment temperature from: | -25 °C |
environment temperature to: | 50 °C |
Photometric data
sensor: | no |
---|---|
dimmable: | yes |
dimming range to: | 100 % |
dimming range from: | 1 % |
color: | white |
interface: | DALI |
sensor type: | no |
Logistic data
item category: | LED drivers |
---|
Dimensions & packaging
EAN | 8010703327528 |
---|---|
Length | 79 mm |
Width | 124 mm |
Height | 22 mm |