TCI LED-Driver DC MAXI JOLLY US PLV - 123419
Product information "TCI LED-Driver DC MAXI JOLLY US PLV - 123419"
60W constant current/constant voltage LED ECG
TCI's IP20-protected constant current LED driver DC MAXI JOLLY US PLV is suitable for luminaire installation or independent installation indoors. Its protection class II prevents electric shocks in direct or indirect contact. The LED driver has a nominal output of up to 60 watts.
The input and output terminals are located on the same side (wire cross-section up to 2.5 mm2 / AWG13). Clamping screws for cables with a minimum diameter of 3 mm to a maximum of 8 mm are mounted on the primary and secondary circuits.
Active Power Factor Corrector integrated
The TCI LED ECG has an Active Power Factor Corrector. In addition, an analog input for a thermal sensor and a 12 V auxiliary output for a maximum of 100 mA are integrated. The current regulation including temperature fluctuations is + - 5%.
The constant current LED driver DC MAXI JOLLY US PLV is protected against overheating and short circuits, mains voltage spikes and overload.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 110-127 V |
| conformity: | CE, ENEC |
| system power: | 25 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 90 °C |
| protection type: | IP20 |
| mounting: | with strain relief |
| protection class: | II |
| environment temperature from: | -25 °C |
| environment temperature to: | 50 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| interface: | PushDIM |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703330368 |
|---|---|
| Length | 79 mm |
| Width | 124 mm |
| Height | 22 mm |