12W LED ECG for built-in/independent mounting
The dimmable DALI2 constant current constant voltage LED driver DC MINIJOLLY DALI from TCI is suitable for installation in luminaires of protection class I and II and for independent mounting. It has a nominal power of up to 12 watts. The LED driver has IP20 protection and is suitable for indoor use. Its Class II protection prevents electric shocks in direct or indirect contact.
The input and output terminal blocks are located on opposite sides (conductor cross section 1.5mm2 / AWG15). There are clamping screws on primary and secondary circuits for cables with a diameter of 5-8mm (primary) and 3-5mm (secondary). The LED ECG is fastened with screws.
Dimmable via DALI2
The LED ECG is dimmed via DALI in a range of 0-100%. The output current can be adjusted via DIP switches. In addition, the LED driver has an Active Power Corrector. The current regulation including temperature fluctuations is +- 5%.
The TCI LED ECG DC MINIJOLLY DALI is protected against overheating and short circuits, mains voltage spikes and against overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a.