TCI LED-Driver DC MINIJOLLY DALI BI - 151403BI
Product information "TCI LED-Driver DC MINIJOLLY DALI BI - 151403BI"
20W constant current LED ECG for installation
The dimmable DALI constant current LED driver DC MINIJOLLY DALI BI from TCI is suitable for installation in luminaires of protection class I and II. It has a nominal power of up to 20 watts. The LED driver has IP20 protection and is suitable for indoor use.
The input and output terminal blocks are located on opposite sides (conductor cross section 1.5mm2 / AWG15). There are clamping screws on primary and secondary circuits for cables with a diameter of 5-8mm (primary) and 3-5mm (secondary). The LED ECG is fastened with screws. Creepage distances and clearances rely on the final application according to IEC / EN 60598-1 (IP00).
Dimmable via DALI
The LED ECG is dimmed vvia DALI in a range of 0.5-100%.
The output current can be adjusted via DIP switches. In addition, the LED driver has an Active Power Corrector. The current regulation including temperature fluctuations is +- 5%.
The TCI LED ECG DC MINIJOLLY DALI BI is protected against overheating and short circuits, mains voltage spikes and against overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5. a.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| rated voltage: | 110-127 V |
| conformity: | CE, ENEC |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 75 °C |
| protection type: | IP20 |
| mounting: | Installation |
| environment temperature from: | -25 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | yes |
| dimming range to: | 100 % |
| dimming range from: | 1 % |
| color: | white |
| interface: | DALI |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703332010 |
|---|---|
| Length | 52 mm |
| Width | 108 mm |
| Height | 22 mm |