TCI LED-Driver MP 80/350 SLIM - 122212
Product information "TCI LED-Driver MP 80/350 SLIM - 122212"
Constant current ECG for luminaire installation
The electronic ballast for LED modules MP 80/350 SLIM from TCI is suitable for installation in luminaires of protection class I and II. The rated power is up to 80 watts.
The input and output terminals are mounted on opposite sides (wire cross-section up to 1.5 mm2 / AWG15). The output is not isolated from the input. The LED ECG is secured with a slot for screws.
Output current adjustable via DIP switches
The output current can be adjusted via DIP switches. In addition, the constant current LED driver has an active power filter to correct the power factor.
The TCI MP 80/350 SLIM is protected against short circuits, mains voltage spikes and against overload. It also has a thermal protection acc. EN 61347 C.5. a. automatically reversible. The current control is + - 5% including temperature fluctuations.
Downloads & Documents
Login
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | linear |
| max housing temperature (tc-max): | 85 °C |
| protection type: | IP20 |
| mounting: | Installation |
| environment temperature from: | -25 °C |
| environment temperature to: | 50 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703308077 |
|---|---|
| Length | 30 mm |
| Width | 280 mm |
| Height | 21 mm |
| Weight | 130 g |