TCI LED-Driver PROFESSIONALE 42 BI - 127486
Product information "TCI LED-Driver PROFESSIONALE 42 BI - 127486"
42W constant current LED driver for built-in use
The dimmable constant current LED driver PROFESSIONALE 42 BI by TCI is suitable for installation in luminaires of protection class I and II. It also has IP20 protection and is suitable for indoor use. The rated power is up to 42 watts.
The LED ECG is supplied with a terminal cover and a cable retainer. It is secured with a slot for screws. The input and output terminals are located on the same side (wire cross-section up to 1.5 mm2 / AWG15).
Output current adjustable via DIP switches
The TCI LED ECG has DIP switches for adjusting the output current and an Active Power Factor Corrector. The current regulation including temperature fluctuations is + - 5%.
The LED driver PROFESSIONALE 42 BI is protected against overheating and short circuits, mains voltage spikes and against overload. It is also equipped with an automatic resetting thermal protection acc. to EN 61347 C.5.a.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
| lifetime: | 50000 h |
| system power: | 13 |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| form type: | rectangular |
| max housing temperature (tc-max): | 80 °C |
| protection type: | IP20 |
| mounting: | Installation |
| environment temperature from: | -25 °C |
| environment temperature to: | 45 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703319837 |
|---|---|
| Length | 42 mm |
| Width | 97 mm |
| Height | 30 mm |