TCI LED-Driver SIRIO 100 BI - 127210
Product information "TCI LED-Driver SIRIO 100 BI - 127210"
1-10V dimmable LED ECG
The dimmable electronic ballast for LED modules SIRIO 100 BI from TCI is suitable for installation in luminaires of protection class I and II. It is also IP20 protected. The rated power is 100 watts. Dimming is possible via a 1-10 V interface. The input and output terminal blocks are opposite sides (wire cross-section up to 1.5-2.5 mm2 / AWG15-AWG13).
Adjustable output current via DIP switches
The constant current LED driver has DIP switches that allow you to adjust the output current. The current control is + - 5% including temperature fluctuations. In addition, an active power corrector is integrated. The LED driver also has an analogical input for a thermal sensor.
The TCI SIRIO 100 BI is protected against overheating and short circuits, mains voltage spikes and overload. Additionally, it has an automatic resetting thermal protection according to EN 61347 C.5. a.
Downloads & Documents
Login
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 220-240 V |
| terminal type: | Push-in CAGE CLAMP® |
| lifetime: | 50000 h |
| system power: | 35 |
Casing
| max housing temperature (tc-max): | 70 °C |
|---|---|
| protection type: | IP20 |
| mounting: | Installation |
| environment temperature from: | -40 °C |
| environment temperature to: | 55 °C |
Photometric data
| dimmable: | yes |
|---|---|
| dimming range to: | 100 % |
| color: | white |
| interface: | 1-10 V |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703309784 |
|---|---|
| Length | 204 mm |
| Width | 59 mm |
| Height | 40 mm |
| Weight | 330 g |