TCI LED-Driver SIRIO 150/200-700 - 127230
Product information "TCI LED-Driver SIRIO 150/200-700 - 127230"
LED ECG for installation / independent mounting
The compact electronic ballast for LED modules SIRIO 150/200-700 from TCI is suitable both for luminaire installation and for independent mounting. Its equipment with protection class II prevents electric shocks with direct or indirect contact. It is also IP20 protected. The rated power is 150 watts.
The input and output terminal blocks are opposite sides (wire cross-section up to 1.5-2.5 mm2 / AWG15-AWG13). The clamping screws on primary and secondary circuits for cables have a minimum diameter of 3 mm up to a maximum of 8 mm.
Adjustable output current via DIP switches
The constant current LED driver has DIP switches that allow you to adjust the output current. The current control is + - 5% including temperature fluctuations. In addition, an active power corrector is integrated. The LED driver has a 12 V auxiliary output for max. 100 mA sensor.
The TCI SIRIO SIRIO 150/200-700 is protected against overheating and short circuits, mains voltage spikes and overload. Additionally, it has an automatic resetting thermal protection according to EN 61347 C.5. a.
Downloads & Documents
Electrical data
| number of channels: | 1 |
|---|---|
| operating mode: | constant current |
| rated voltage: | 220-240 V |
| conformity: | CE, ENEC |
| lifetime: | 50000 h |
Casing
| ballproof: | no |
|---|---|
| fire protection: | no |
| max housing temperature (tc-max): | 80 °C |
| protection type: | IP20 |
| mounting: | surface mounting |
| protection class: | I |
| environment temperature from: | -40 °C |
| environment temperature to: | 55 °C |
Photometric data
| sensor: | no |
|---|---|
| dimmable: | no |
| color: | white |
| sensor type: | no |
Logistic data
| item category: | LED drivers |
|---|
Dimensions & packaging
| EAN | 8010703311275 |
|---|---|
| Length | 60 mm |
| Width | 240 mm |
| Height | 40 mm |